Mar-2023 Realistic 300-610 Exam Dumps with Accurate & Updated Questions
300-610 Exam Dumps - PDF Questions and Testing Engine
Who Should Aim at Cisco 300-610?
Cisco 300-610 is clearly not for everyone. It is for those willing to make big in the data center management industry. Thus, data center engineers as well as data center architects are the targeted job roles for this test.
Speaking of compulsory prerequisites, there are none. However, the word of wise says that it is good to have three to five years of practical experience in generating data center solutions. In this case, the certification journey will be a lot more simplified.
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
What kind of preparation is required for the Cisco 300-610 Exam
There are some things you can do to prepare for the Cisco 300-610 exam. The first is to start with a good foundation of knowledge. This can be achieved by taking a test like the one you will be taking when you are ready to take the Cisco 300-610 exam. After that, you need to study and practice. You should combine these two things. Start by finding an online training facility such as 300-610 Dumps that provides both practice questions and tools to help you learn things better when you need them. Because there is no way for us to tell what kind of Cisco 300-610 Exam questions you will see on your test, we cannot tell you exactly which ones you need to study beforehand. You should review all available Cisco 300-610 Exam questions and answers we have on our site, but don't focus too much on any one question or topic in particular until you know where it will come from on your specific exam. This is why we recommend that you take a full practice test with our software before taking your actual exam. Skilled specialist records is to sample the retest weeks. A full practice test will give you experience with the process, allow us to update our questions based on your results, and show you what areas of the exam might cause problems for you later on.
NEW QUESTION 18
An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.
Which two settings must be selected to meet these requirements? (Choose two.)
- A. end-host mode
- B. static pinning
- C. switching mode
- D. dynamic pinning
- E. NPIV mode
Answer: A,B
NEW QUESTION 19
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 20
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. BFD
- B. LLDP
- C. UDLD
- D. MCP
Answer: C
NEW QUESTION 21
A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool.
Which tool meets these requirements?
- A. Cisco Cloud Center
- B. Cisco UCS Director
- C. Cisco Network Assurance
- D. Cisco Prime Infrastructure
Answer: B
NEW QUESTION 22
A network engineer is implementing Cisco UCS manager with Cisco UCS center integration. The company is strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS manager. Which two profile must be used to meet these requirements? (Choose two.)
- A. Local power
- B. Public network control
- C. Local service
- D. Global maintenance
- E. Restricted chassis
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Operations/b_UCSC_Ops_Guide/b_UCSC_Ops_Guide_chapter_0111.html#id_16185
NEW QUESTION 23
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. FC end-host mode
- B. NPV mode
- C. NPIV mode
- D. FC switching mode
Answer: D
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION 24
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 25
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. reduction in application performance
- B. distance limitations
- C. specific backup requirements
- D. potential data loss
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous- replication-vs-asynchronous-replication/
NEW QUESTION 26
An ACI deployment must:
Which VRF configuration must be used?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION 27
A confidentially and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?
- A. IPsec
- B. MACsec
- C. OTV
- D. GRE
Answer: B
Explanation:
The key to solution is "Ethernet frames". Frames are layer 2. IPsec encrypts at layer 3.
NEW QUESTION 28
Where does Cisco UCS handle Fibre Channel traffic failover?
- A. in the hardware on the Cisco UCS VIC 12xx adapter or later
- B. in the hardware on any Cisco UCS VIC adapter
- C. on the host, by using multipathing software
- D. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode
Answer: C
NEW QUESTION 29
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
- B. A separate DSCP value must be configured for all FCIP VSAN traffic.
- C. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- D. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
Answer: D
NEW QUESTION 30
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- B. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- C. Create a SAN port channel that faces the storage device to sustain a link failure.
- D. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
Answer: B
NEW QUESTION 31
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 32
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. cross-connections with pinning
- B. VSS that has unified uplinks
- C. Ethernet and unified ports on the same port channel
- D. vPC that has unified uplinks
Answer: D
Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 33
......
Pass Cisco 300-610 Exam Quickly With ValidTorrent: https://www.validtorrent.com/300-610-valid-exam-torrent.html
300-610 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1ecpewqUIOzGovPRy9Fq7uSjT5w4wNLRd