Mar 03, 2023 Reliable Study Materials for 300-430 Exam Success For Sure
100% Latest Most updated 300-430 Questions and Answers
Topics of Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
These core topics of 310-430 practice test listed below are general recommendations for the material that is likely to be used for the examination. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the 310-430 exam dumps pdf and for clarity purposes.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Cisco 300-430: Implementing Cisco Enterprise Wireless Networks examination is listed below in detail for each section of 300-430 exam dumps:
- Implementing and Troubleshooting Secure Client Connectivity
- Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)
- Configure Guest Services in the Wireless Network
- Implementing and Troubleshooting Quality of Service (QoS) in Wireless Networks
- Implementing and Troubleshooting Advanced Wireless Network Services
- Capture Successful QoS Traffic Marking in the Wireless Network
- Customize Cisco Prime Infrastructure for Network Monitoring
- Configure, Detect, and Locate Services on the Cisco CMX
- Configure QoS in the Wireless Network for Voice and Video Services
- Configure Cisco Application Visibility and Control (AVC) in the Wireless Network
- Understanding Cisco Wireless Foundations (WLFNDU)
- Configure Bring Your Own Device (BYOD) in the Wireless Network
- Capture a Successful AP Authentication
- Implement Authentication, Authorization, and Accounting (AAA) Services for Central Mode WLANs
- Capture Successful Client Authentications
Device Hardening
This module covers 10% of the exam content and measures one’s skills in the following operations:
- Implementing device access controls;
- Implementing access point validation.
- Implementing CPU ACLs on controllers;
Topics of Cisco 300-430 Exam
The Cisco 300-430 exam evaluates the competence of the candidates in implementing the wireless network. The subject areas that are measured in the delivery of this test include QoS, FlexConnect, Multicast, monitoring, advanced location services, as well as device hardening & client connectivity security. The details of these topics are enumerated below:
FlexConnect
This domain makes up about 15% of the exam content and measures the proficiency of the students in specific areas. They will be required to demonstrate their skills in the following tasks:
- Implementing Office Extend.
- Deploying the capabilities of FlexConnect, such as FlexConnect groups & roaming, Smart AP image upgrade, split-tunnel and fault tolerance, and Flex ACL & VLAN-based central switching;
- Deploying the components of FlexConnect, including switching & operating modes;
NEW QUESTION 36
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect group BranchA-FCG vlan add 30
- B. config flexconnect BranchA-FCG vlan 30 add
- C. config flexconnect group BranchA-FCG vlan 30 add
- D. config flexconnect BranchA-FCG vlan add 30
Answer: A
Explanation:
NEW QUESTION 37
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?
- A. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- B. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- C. Configure a second WLC to support half of the APs in the deployment.
- D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.
Answer: A
Explanation:
NEW QUESTION 38
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Change the AVC application WebEx-app-sharing to mark
- B. Change the WLAN reserved bandwidth for WebEx
- C. Create an ACL for WebEx
- D. Create an AVC profile for WebEx
Answer: D
NEW QUESTION 39
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?
- A. Source Specific Multicast
- B. Protocol Independent Multicast Sparse Mode
- C. Protocol Independent Multicast Dense Mode
- D. Multicast Source Discovery Protocol
Answer: A
Explanation:
https://mrncciew.com/2012/12/28/multicast-deployment-types/
NEW QUESTION 40
A wireless engineer deployed all remote sites as FlexConnect. The client VLAN assignment on these sites is configured manually mapped by WLAN and using local switching. Dynamic VLAN assignment is provided by the newly deployed Cisco ISE. Which IETF attribute must be configured on the AAA server to send that VLAN ID?
- A. Tunnel-Medium-Type
- B. Tunnel-Assignment-ID
- C. Tunnel-Client-Endpoint
- D. Tunnel-Private-Group-ID
Answer: D
NEW QUESTION 41
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
Explanation:
Note: To enable Local switching, you have to disable central switching
NEW QUESTION 42
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. lost and stolen devices
- B. malware
- C. unauthorized users
- D. keyloggers
- E. network analyzers
Answer: A,B
Explanation:
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION 43
Refer to the exhibit.
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?
- A. The Cisco WLC local EAP profile is misconfigured
- B. The Cisco WLC is configured for the incorrect date.
- C. The client is falling to accept certificate.
- D. The user is using invalid credentials.
Answer: D
NEW QUESTION 44
What is the Cisco recommended configuration for a Cisco switch port connected to an AP in local mode for optimal voice over WLAN performance with an 8821 wireless phone?
- A. switchport encapsulation dotlq
switchport mode trunk
mis qos trust device cisco-phone - B. switchport mode access
mis qos trust device cisco-phone - C. switchport mode access
mis qos trust dscp - D. switchport mode access
mis qos trust cos
Answer: D
NEW QUESTION 45
A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?
- A. The laptop has not received a valid IP address from the wireless controller.
- B. The user Active Directory account is locked out after several failed attempts.
- C. There is an invalid 802.1X authentication policy on the authenticator.
- D. There is an IEEE invalid 802.1X authentication policy on the authentication server.
Answer: C
NEW QUESTION 46
An engineer is configuring a BYOD deploymernt strategy and prefers a single SSID model.
Which technology is required to accomplish this configuration?
- A. wireless control system
- B. mobility service engine
- C. identify service engine
- D. Prime Infrastructure
Answer: C
NEW QUESTION 47
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- B. Sparse mode floods. Dense mode uses distribution trees.
- C. Sparse mode uses distribution trees. Dense mode floods.
- D. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te
NEW QUESTION 48
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION 49
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS uses only UDP port 5436 as a destination port.
- B. Controller software must be newer than 7.0.6+.
- C. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- D. mDNS is not supported over IPv6.
- E. mDNS cannot use UDP port 5353 as the destination port.
Answer: C,D
Explanation:
NEW QUESTION 50
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 10 seconds
- B. 60 seconds
- C. 15 seconds
- D. 30 seconds
Answer: C
Explanation:
NEW QUESTION 51
Refer to the exhibit.
A wireless engineer has integrated the wireless network with a RADIUS server. Although the configuration on the RADIUS is correct, users are reporting that they are unable to connect. During troubleshooting, the engineer notices that the authentication requests are being dropped. Which action will resolve the issue?
- A. Allow connectivity from the wireless controller to the IP of the RADIUS server.
- B. Authenticate the client using the same EAP type that has been set up on the RADIUS server.
- C. Configure the shared-secret keys on the controller and the RADIUS server.
- D. Provide a valid client username that has been configured on the RADIUS server.
Answer: A
NEW QUESTION 52
An engineer is implementing profiling for BYOD devices using Cisco ISE. When using a distributed model, which persona must the engineer configure with the profiling service?
- A. Policy Services Node
- B. Monitor Node
- C. Device Admin Node
- D. Primary Admin Node
Answer: A
NEW QUESTION 53
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?
- A. Allow TCP/16113 port on the firewall.
- B. Allow TCP/16666 port on the router.
- C. Allow UDP/16113portonthe central switch.
- D. Allow UDP/16666 port on the VPN router.
Answer: A
Explanation:
Explanation
https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html
NEW QUESTION 54
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
- A. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
- B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
- C. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
- D. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
Answer: A
NEW QUESTION 55
An engineer set up a VoWLAN with QoS on the WLC and a class map on the switch, but the markings are not being preserved correctly in the end-to- end traffic flow. Which two configurations on the wired network ensure end-to-end QoS? (Choose two.)
- A. access lists
- B. policy maps
- C. trust boundaries
- D. QoS licenses
- E. NetFlow
Answer: A,B
NEW QUESTION 56
......
New Cisco 300-430 Dumps & Questions: https://www.validtorrent.com/300-430-valid-exam-torrent.html
Try with 100% Real Exam Questions and Answers: https://drive.google.com/open?id=1vgETYMUV2Wi4bx-mAf3nGqO4gLaDVAn4