Free 350-501 Exam Files Verified & Correct Answers Downloaded Instantly [Q46-Q69]

Free 350-501 Exam Files Verified & Correct Answers Downloaded Instantly

Instant Download 350-501 Dumps Q&As Provide PDF&Test Engine

Cisco 350-501 certification exam is a highly sought-after qualification for IT professionals who want to specialize in service provider network technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification exam is designed to test the candidate's knowledge and skills in implementing and operating Cisco Service Provider Network Core Technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification is ideal for individuals who work as network engineers, network administrators, or network technicians, and wish to advance their careers in service provider networking.

NEW QUESTION # 46
Refer to the exhibit:

An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)

B)

C)

D)

A. Option A
B. Option B
C. Option D
D. Option C

Answer: A

NEW QUESTION # 47
Refer to the exhibit:

Which statement supports QPPB implementation?

A. QPPB policies affect only egress traffic
B. QoS policies use BGP to gain full coverage on the network.
C. QoS policies are identified in the MPLS forwarding table
D. QoS policies rely exclusively on BGP attributes to manipulate traffic

Answer: D

NEW QUESTION # 48
Refer to the exhibit:

What is significant about the number 2 in the configuration?

A. It represents the version of SNMP running
B. It indicates two SNMP managers can read and write with the agent using community string cisco test
C. It dictates the number of sessions that can be open with the SNMP manager
D. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent

Answer: D

NEW QUESTION # 49
Refer to the exhibits:

R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2 R1 message periodically Based on this output, which statement is true?

A. 1S-1S neighbor authentication is failing for Level 1 and Level 2 PDUs .
B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs
C. IS-IS neighbor authentication is failing for Level 2 PDUs only.
D. IS-IS neighbor authentication is failing for Level 1 PDUs only

Answer: D

NEW QUESTION # 50
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right

Answer:

Explanation:

NEW QUESTION # 51
Which service is a VNF role?

A. Storage
B. Compute
C. Firewall
D. Network

Answer: D

NEW QUESTION # 52
Refer to the exhibit:

A network administrator wants to enhance the security for SNMP for this configuration.
Which action can the network administrator implement?

A. Re-configure to use SNMPv3.
B. Maintain the configuration but switch to an encrypted password for device access through SSH
C. Add a community string to the existing entry
D. Re-configure to use SNMPv2 with MD5 authentication

Answer: A

NEW QUESTION # 53
Drag and drop the functionalities from the left onto the target fields on the right.

Answer:

Explanation:

NEW QUESTION # 54
Refer to the exhibit:

Which purpose of implementing NSF with this configuration is true?

A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
B. The router uses NSF to load balance traffic on a routed EtherChannel
C. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds

Answer: A

NEW QUESTION # 55
Refer to the exhibit:

Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?

A. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family
B. The neighbor relationship is down because R1 believes R2 is in AS 65012.
C. The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement
D. The neighbor relationship is up

Answer: B

NEW QUESTION # 56

Refer to the exhibit. R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1, these log messages are seen:

Which command can be configured on routers R1 and R2 on f0/0 interfaces to form OSPF adjacency?

A. ip ospf network point-to-point
B. ip ospf network point-to-multipoint non-broadcast
C. ip ospf network non-broadcast
D. ip ospf network broadcast

Answer: A

Explanation:
Section: Networking
Explanation/Reference: https://community.cisco.com/t5/routing/ospf-point-to-point-links/td-p/1913398

NEW QUESTION # 57
A remote operation center is deploying a set of l-BGP and E-BGP connections for multiple IOS-XR platforms using the same template. The l-BGP sessions exchange prefixes with no apparent issues, but the E-BGP sessions do not exchange routes. What causes this issue?

A. The l-BGP neighbors are mistyped and HELLO packets cannot be exchanged successfully between routers.
B. The E-BGP neighbors are not allowed to exchange information due to the customer platforms default policy.
C. A PASS ALL policy has not been implemented for the l-BGP neighbors.
D. The next-hop-self command is not implemented on both E-BGP neighbors.

Answer: B

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/routing/configuration/guide/b-routing

NEW QUESTION # 58
Refer to the exhibit:

With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?

A. 192.168.0.1
B. 192.168.0.4
C. 192.168.0.3
D. 192.168.0.5

Answer: C

NEW QUESTION # 59
On the BGP Best Path Selection, when two external paths from different EBGP neighbors are received, the oldest path received can be the tie break to select the best path.
Which Cisco IOS command ignores this decision criteria and checks the next decision criteria?

A. bgp best path cost-community ignore
B. bgp best path as-path ignore
C. bgp best path compare-routerid
D. bgp best path med missing-as-worst

Answer: C

NEW QUESTION # 60
Refer to the exhibit.

Which configuration must be applied to each of the four routers on the network to reduce LDP LIB size and advertise label bindings for the /32 loopback IP space only?

A. Option A
B. Option B
C. Option D
D. Option C

Answer: A

NEW QUESTION # 61
Refer to the exhibit.

An engineer is trying to implement BGP configuration on a router Which configuration error prevents the ASBR from establishing a BGP neighborship to a directly connected BGP speaker?

A. The VPNv4 address family interferes with the 8GP IPv4 address family negotiations.
B. The routing policy is absent for this Cisco IOS XR eBGP instance.
C. The TCP session parameters are not specified.
D. The IPv4 address family configuration under neighbor configuration-mode must be removed.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r41/routing/configuration/guide/routing_cg41xr12k_chapter1.html bgp router-id comes under TCP session parameters

NEW QUESTION # 62
BGP has been implemented on a IOS XR router.
Which configuration sends BGP IPv4 labels to build inter-domain LSPs?

A. router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community
B. router bgp 65515 neighbor 172.16.70.23 address-family ipv4 labeled-unicast
C. router bgp 65515 no bgp default ipv4-unicast
D. router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community extended

Answer: B

NEW QUESTION # 63

Refer to the exhibit. A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?

A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family.
B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family.
D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration.

Answer: B

Explanation:
Section: Networking

NEW QUESTION # 64
Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.

Answer:

Explanation:

NEW QUESTION # 65
Drag and Drop Question
Drag and drop the characteristics from the left onto the automation tool on the right.

Answer:

Explanation:

NEW QUESTION # 66
Refer to the exhibit:

This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?

A. It shows the hostname of the device as rpc-reply
B. It shows that the running configuration is blank
C. It shows NETCONF uses remote procedure calls.
D. It shows that the full configuration is being modeled by VANG

Answer: C

NEW QUESTION # 67
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?

A. Option A
B. Option B
C. Option D
D. Option C

Answer: A

NEW QUESTION # 68
ASN 65001 is peering with ASN 65002 to exchange IPv6 BGP routes. All routes that originate in ASN 65001 have a standard community value of 65001:100, and ASN 65002 is allowed to advertise only 2001
:db8:aaaa::/48. An engineer needs to update the ASN 65001 route-filtering configuration to meet these conditions:
* Looped routes into ASN 65001 and routes that have traversed 10 or more ASNs must be denied.
* Routes accepted into ASN 65001 must be assigned a community value of 65001:200.
Which configuration must the engineer apply to the ASN 65001 border router?
A)

B)

C)

D)