100% Reliable Microsoft H19-401_V1.0 Exam Dumps Test Pdf Exam Material
Based on Official Syllabus Topics of Actual Huawei H19-401_V1.0 Exam
NEW QUESTION # 15
Which of the following methods can be used to obtain the latest and most accurate manufacturers and models supported by translation tools? (Multiple Choice)
- A. Find in historical training videos
- B. The tool has strong capabilities and is supported by all manufacturers.
- C. Download the "Configuring Translation Support Situation (Huawei and Friendly Vendors) Panoramic Questions" from the tool usage guide.
- D. In the drop-down list of source device and destination device selection in the translation tool
Answer: C,D
NEW QUESTION # 16
Regarding the multi-Hub scenario, which of the following descriptions is incorrect?
- A. Support multi-hub scenarios based on business network segments
- B. Support multi-active Hub scenarios based on Spoke sites
- C. A VPN can select two Hubs from multiple Hubs as branch interworking Hubs
- D. Branch interworking hubs in VPN can work in active-active mode
Answer: D
NEW QUESTION # 17
In the SDN-WAN solution, what is the detection technology used for TEHSB and VPN FRR protection solutions?
- A. NQA
- B. BFD
- C. Ethoam
- D. Y1731
Answer: B
NEW QUESTION # 18
HiSec Insight supports full attack path data mining, mainly including (). (Multiple choice)
- A. Node threat event mining
- B. Node abnormal event mining
- C. Node log data mining
- D. Node traffic data mining
Answer: A,B,C,D
NEW QUESTION # 19
In Business Mobile, security groups cannot statically specify IP addresses or address segments.
- A. True
- B. False
Answer: B
NEW QUESTION # 20
When using planning and design tools, what is the incorrect description of the NCE-Campus planning function?
- A. Plan the networking method and cluster size in the solution scenario
- B. Traditional networks also support NCE-Campus planning
- C. Support installation parameter design
- D. Support IP address design
Answer: B
NEW QUESTION # 21
Create multiple IUNs in the storage system at the data center site. Some LUNs are used to run high-priority key services, and some LUNs are used to perform low-priority backup tasks. Which of the following technologies can ensure the normal operation of key tasks and prevent resources from being preempted by backup tasks?
- A. Anti-wear leveling
- B. SmartQos lower limit guarantee
- C. SmartQos burst traffic control
- D. Wear leveling
Answer: C
NEW QUESTION # 22
Huawei SD-WAN solution, regarding the RR deployment method, which of the following statements is wrong?
- A. Only supports co-deployment of RR and HUB sites
- B. Support RR multi-region deployment
- C. Support RR independent deployment
- D. Support co-deployment of RR and site
Answer: A
NEW QUESTION # 23
Public security zero trust refers to the GA/DSJ351 standard.
- A. True
- B. False
Answer: A
NEW QUESTION # 24
In active-active technology, what are the advantages of fastwrite's fast writing function? (Multiple Choice)
- A. Performance improved by 30%
- B. It works well when the distance is more than 10km
- C. Reduce data transmission between 2 data centers
- D. Reduce the interaction between 2 data centers from 2 RTT to 1 RTT
Answer: A,D
NEW QUESTION # 25
Which of the following modes are supported for indoor settled AP installation?
- A. Ceiling mounting
- B. Wall mounting
- C. Support mounting
- D. Threaded rod mounting
Answer: A,B,D
Explanation:
Indoor AP installation modes vary. The HCSP-Presales-Campus Network Planning and Design V1.0 documentation lists:
A, B, C: Threaded rod, ceiling, and wall mounting are standard for Huawei APs.
NEW QUESTION # 26
WLAN scenario, which of the following statement about the requirements for confirming on-site environment information during on-site survey is correct? (Multiple choice)
- A. Confirm whether the site is completely consistent with the architectural drawings. Mark out the inconsistent areas, take photos and record them as much as possible, and mark the room number of the site in the drawings.
- B. When outdoors, you need to pay attention to the height and blocking range of obstacles on site.For irregular obstacles (such as trees, etc.), try to take photos to record them.
- C. During the indoor survey, pay attention to marking other obstacles that are not shown in the drawings but affect the coverage effect; such as load-bearing columns, large objects that are considered to be added partitions and suspended ceilings when full.
- D. During the indoor survey, compare the drawings to identify the types of obstacles, mark the actual location and material of each type of obstacle, mark different obstacles with different colors, and test their 2.4G and 5G attenuation values.
- E. Take photos of the scene as comprehensively as possible indoors, paying special attention to the equipment installation location, overall coverage area, internal building structure, new obstacles, etc. For outdoor coverage, you only need to pay attention to the obstacles between the AP and the coverage area. .
Answer: A,B,C,D
NEW QUESTION # 27
In iMaster NCE-Campus network plane planning, if there is no special isolation requirement, the recommended networking method is:
- A. Two-plane networking
- B. Three-plane networking
- C. Four-plane networking
Answer: A
NEW QUESTION # 28
In CloudCampus small and medium-sized campus network design (public cloud scenario), when engineers are designing reliability for the site network, what are the items that do not need to be considered?
- A. Egress link reliability
- B. Equipment reliability
- C. Cloud management platform reliability
- D. Reliability of links within the campus
Answer: C
NEW QUESTION # 29
In a safety-related relocation project, which of the following behaviors during the replacement process is incorrect? (Multiple choice)
- A. There was no communication in the early stage, and the R&D review was notified temporarily on the day of replacement.
- B. If the customer's business direction and usage functions are not clear, replace them directly.
- C. Configuration translation relies solely on manual translation and does not use existing tools.
- D. After the configuration is translated, it is not verified on the device and is used directly online.
Answer: A,B,C,D
NEW QUESTION # 30
In a multi-campus interconnection LANWAN scenario, refer to the following topology campus topology. Which of the descriptions about the design and deployment of the dual-gateway Interlink solution is incorrect?
- A. Interlink cannot borrow the Layer 2 service interface on the CPE LAN side
- B. Interlink serves as the interconnection port of dual gateway devices and provides forwarding of business (VPN) traffic between devices through sub-interfaces.
- C. Interlink can be interconnected using direct links. When the site business traffic is large and the CPE port resources are sufficient, it is recommended that Interlink adopts Eth-trunk link.
- D. Complete the synchronization of dual-gateway device information through the Interlink control sub- interface: such as synchronization and backup of application identification results, synchronization and backup of overlay connection information and connection quality information, etc.
Answer: A
NEW QUESTION # 31
Which of the following aspects are proposed by Huawei SD-WAN solution for application experience optimization? (Multiple choice)
- A. Application routing
- B. Wide area optimization
- C. Application identification
- D. QOS
Answer: A,B,C,D
NEW QUESTION # 32
During the control channel establishment process, the BGPEVPN neighbor relationship is generally established between the CPE and the RR through the loopback interface.
- A. True
- B. False
Answer: A
NEW QUESTION # 33
OceanStor Dorado NAS log audit supports operation log audit and management log audit. What is the granularity of log audit? (Multiple choice)
- A. vStore-level business operations audit
- B. Device level business operations audit
- C. Tenant-level management operations audit
- D. Device-Level Management Operations Audit
Answer: A,D
NEW QUESTION # 34
Which of the following functions does OceanStor Dorado intelligent data reduction use? (Multiple choice)
- A. Online compression
- B. Online deduplication
- C. Later deletion
- D. Data compaction
Answer: A,B,C,D
NEW QUESTION # 35
In A.C3.0, when deploying Fabric network, which of the following operations is not an operation in Fabric network deployment?
- A. Configure access management
- B. Configure policy template
- C. Create an external network
- D. Create Fabric network
Answer: B
NEW QUESTION # 36
If the same user accesses two different applications, () application tokens will be generated.
- A. 0
- B. 1
Answer: B
NEW QUESTION # 37
Based on write-time adaptive locality sorting and optimization, how much better is the performance of EDD-based OceanProtect backup storage than its peers?
- A. 30%
- B. 10%
- C. 40%
- D. 20%
Answer: D
NEW QUESTION # 38
WLAN signal path attenuation is related to which of the following three factors? (Multiple choice)
- A. Antenna direction
- B. Transmission distance
- C. Environment type
- D. Signal frequency
Answer: B,C,D
NEW QUESTION # 39
Which statement about configuration management on NCE-Campus is correct? (Multiple choice)
- A. If the configuration delivery fails, you need to eliminate the cause of the failure and redeliver the partial or full configuration failure.
- B. After the configuration operation is completed, you need to enter configuration maintenance, check the configuration status, and confirm that it has been successfully delivered.
- C. When the operation is completed on the NCE-Campus page, it means that the configuration is successfully delivered.
- D. After all configurations are completed, it is recommended to enter configuration maintenance to save the configuration.
Answer: A,B,D
NEW QUESTION # 40
......
Free H19-401_V1.0 Dumps are Available for Instant Access: https://www.validtorrent.com/H19-401_V1.0-valid-exam-torrent.html
View All H19-401_V1.0 Actual Exam Questions Answers and Explanations for Free: https://drive.google.com/open?id=14HQLUdckoS6T9pR2GHTiAbx0k-0CI4q4